co燃氣報警器

co燃氣報警器_公司新聞_燃氣報警器_可燃氣體報警器_可燃氣體探測器_氣體報警控制器_SF6泄漏報警主機_東信電子

co燃氣報警器可燃氣體報警器主要有催化燃燒型、熱導型、紅外吸收型和半導體型等幾種，其中使用最廣泛的是催化燃燒型。催化燃燒型報警器傳感器主要是由橋式電路、氣敏(min)原件組成。當可燃氣體進入報警器探頭，氣體與空氣中的氧發生氧化反應，鉑絲表面產生無煙催化燃燒，導致鉑絲升溫，鉑絲是感溫原件，電阻值隨溫度升高而增長，橋式電路失去平衡，產生電流，即將氣體濃度值轉換為電信號輸出。報警器由探測器和控制器兩部分組成，探測器即探頭傳感器部分，將氣體濃度轉換成電信號，控制器包括控制電路、放大電路、報警系統和顯示器等部分。

技術指標：
檢測氣體：可燃、有毒氣體
檢測原理：催化燃燒、電化學式 紅外
測量范圍：0-100%lel ，0-NPPM（根據氣體決定）
分 辨 率：0.1PPM/1PPM
精 度：±3%（F.S）
響應時間：<10秒
結構材料：壓鑄鋁
防爆標志：EXD II CT6
防護等級：IP65
工作溫度：-20-50℃
工作濕度：<95%RH
尺寸：165×150×75（mm）
電氣接口：M20*1.5內螺紋
信號輸出：三線制4-20MA
售后服務：質保一年終生維護
工作原理
探測器主要由傳感器、集成電路、阻容電路等組成。將氣體濃度信號轉換為4-20mA標準信號，上傳給控制器。
四、探測器調試
1、通電
探測器在與配套控制器連接通電后，控制器顯示數值“0”或個位數值（個位數值通電20分鐘后可回到“0”，這屬于正常情況，請放心使用），即為正常工作狀態。如否，請檢查接線是否正確。
2、調零、標定校準
為保證測量數值的精確，儀器連續運行3個月必須進行重新標定校準。請按（八）操作或與我公司聯系。
co燃氣報警器